This information applies to:
- LuxRiot version 1.7.4
Summary
This post described how to configure multiple channels for the SANYO cameras.
Description
LuxRiot DVR can receive multiple streams with different settings from the SANYO VCC-HD2500/2500P, VDC-HD3500/3500P, VCC-HD4600/4600P, VCC-HD5400/5400P network (IP) cameras. This could be useful to decrease client CPU usage and client to server network load without degradation of the recording quality.
First of all you need to create one stream. Please follow the Camera Setup Wizard, create and configure new device as usual. Then open Camera Setup Wizard again, select created device and click next.
Please note that the camera hardware has performance limitations and can support only specific streams of data.
Before configuring multiple streams in LuxRiot software please make sure the camera supports chosen streams.
Configure streams via camera web browser and if it is allowed then you can configure same streams in LuxRiot software.
Please note that after camera is connected to LuxRiot software all stream configurations will be erased from the camera and you will then need set required streams in LuxRiot software.
Then open camera properties.
In appeared property pages select Video Input tab and press Create button.
In appeared window enter new channel title and select video source. Please note that the default video source equals to first stream. Then click Ok and close property pages. New channel will be created.
Now you can configure properties for the each channel as usual for single camera.