MJPEG mode in Linksys network cameras
Luxriot 1.1.18 will support Linksys WVC54G network camera. This camera is using MPEG4 codec by default. To view video from Linksys camera you have manually choose MJPEG mode using the following URL:
http://11.22.33.44/adm/file.cgi?h_videotype=mjpeg&todo=save
where 11.22.33.44 - your camera IP address
Please note that this will disable the live view in the camera itself and you will need to use the following to switch it back:
http://11.22.33.44/adm/file.cgi?h_videotype=mpeg4&todo=save
LuxRiot 1.6.12 http://blog.luxriot.com/382 and later support this model implementing its native protocols, including MPEG-4. It is recommended to re-add the camera as “New MEdia Device” see screenshots here http://blog.luxriot.com/346 and you will be able to find this model in new updated model list, and you should be able to receive video into LuxRiot DVR.
Comment by roman — July 25, 2008 @ 8:51 am
hello, I wanted to know how to set this camera.
because when you perform the configuration, I get error http 400, invalid syntax.
thx
Comment by xAnubiSx — October 1, 2008 @ 3:17 pm
xAnubiSx, (a) make sure you add camera as described in comment above and (b) make sure you have the latest firmware on the camera. Also you can try to upgrade to the latest pre-release LuxRiot http://luxriot.com/downloads/LuxRiot/1.6.14/12018/LuxRiot-1.6.14.exe
Comment by roman — October 1, 2008 @ 3:58 pm
update the firmware and worked.
Thank you!
there is a version in Spanish?
Comment by xAnubiSx — October 2, 2008 @ 12:25 pm
xAnubiSx, yes download from http://blog.luxriot.com/category/development/release or this latest pre-release beta http://luxriot.com/downloads/LuxRiot/1.6.14/12018/LuxRiot-1.6.14.exe, both have Spanish languages as an option.
Comment by roman — October 2, 2008 @ 12:37 pm